|
|
Build Your Online Product Catalogs?
| Product Name: |
Manual Molding Silicone Rubber
|
| Supply Ability: |
2000tons |
| Related proudcts |
liquid silicone, molding silicone rub, manual molding sili, |
| Specifications |
HY528, HY540 |
| Price Term: |
FOB |
| Port of loading: |
Shenzhen |
| Minimum Order |
100kg |
| Unit Price: |
FOB Shenzhen USD 4.8~7.5/KG |
|
1. Applications of Manual Molding Silicone Rubber
Manual Molding Silicone Rubber is mainly used for model design of : manual mold, PVC plastic molds, cement products, low melting point alloy molds, alloy toys, plastic toys, electronics, handicrafts, stationery, large-scale sculpture, reproduction of cultural relic, shoe sole molds, pad printing allocation, Electronic equipment anti-vibration, etc.
2. Brief Description/Features of Manual Molding Silicone Rubber
a. Manual molding silicone rubber has the advantage of:
Good elasticity
Non-deformation
Heat resistance
Low shrinkage
b. Model Codes of Manual Molding Silicone Rubber
HY-528# is applicable to make molds of smaller products and the production will be 2-3 pieces.
HY-540#, co***red to other two types, for its moderate hardness and better quality & performance, its production will be 20-30 pieces.
HY-570# is applicable to large size products duplications and Electronic equipment anti-vibration.
c. Operation Instructions for Manual Molding Silicone Rubber
RTV-2 Manual Molding Silicone Rubber is a flowable liquid, and the quality has nothing to do with the color. It consists of two components. Part A is a flowable liquid silicone rubber, part B is the curing agent. Firstly, after your previous work of dealing with the original model, take some liquid silicone rubber, add 2%-3% curing agent of the amount of silicon, and mix them evenly. Then after vacuum-pumping the mixture, you can pour it into the mold frame. The silicone mold will cured in 2-3 hours.
Note: The time for vacuum-pumping should be less than 3� minutes, otherwise, once the silicone rubber has cross-link reaction during vacuuming, it will not be operated.
3. FAQ of manual molding silicone rubber
How to prevent silicone manual molds getting sticky?
The main reason for this problem is that you do not handle the products or original molds well, and then you should deal with the original mold or products carefully before molding. Such as for the products with a complicated patt |
| Company: |
Shenzhen Hong Ye Jie Technology Co., Ltd.
|
| Contact: |
Ms. Leah Chou |
| Address: |
Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi |
| Postcode: |
518117 |
| Tel: |
086-755-89948019 |
| Fax: |
086-755-89948030 |
| E-mail: |
|
|
|
|
Home
